Adjustment of the safety control system and braking stop for the heating of the bearing base of the electroplating spin dryer

1. Overloaded use

The outer diameter size of the bearings installed on the electroplating spin dryer is also different, and the corresponding pressure that can be carried is also different. So if we fail to load appropriately according to the appropriate capacity of the electroplating spin dryer and over load, it will result in excessive pressure on the bearings, leading to heating problems.

2. The concentricity of the main shaft of the electroplating spin dryer is incorrect

Under normal circumstances, we do not pay much attention to concentricity, and a high tendency towards concentricity in the main shaft can easily lead to bearing heating. So when the bearings of the electroplating spin dryer have heating and overheating problems, we may as well check the concentricity of its main shaft. If it is a problem with the concentricity of the main shaft, it is recommended to hire professional maintenance personnel to repair and calibrate it.

3. Poor lubrication

Most of the time, we recommend that each user add lubricating oil to the bearings of the electroplating spin dryer after a certain period of time to ensure smooth and stable operation of the bearings. Once there is a lack of oil, the corresponding friction force will increase, and the probability of heating and overheating will also be higher.

4. Poor bearing quality

For some electroplating spin dryers that are equipped with low-priced bearings to save costs, due to poor quality and non authenticity of the bearings, they may generate bearing heating, scalding, and other phenomena such as bearing burnout. For such cases, we recommend that users choose authentic (imported) bearings for replacement.

The electroplating spin dryer works on the principle of centrifugal motion, which is driven by an electric motor to rotate the inner container at high speed. The water in the detached material undergoes centrifugal motion under the high-speed rotation, and the water splashes out of the inner container through the surrounding eyes of the inner container shell, achieving the purpose of dehydration.

Electroplating spin dryer, also known as electroplating spin dryer, is made of stainless steel for both the inner and outer shells. It is designed according to the unified standards of the former Ministry of Home Textile Industry, and has the advantages of simple and reasonable structure, high efficiency, low wear, low noise, safety and reliability. The SME301-150 high-capacity electroplating spin dryer adopts imported variable frequency speed control and is equipped with a feeding and discharging device. It has a large capacity, low energy consumption, and a complete anti vibration, timing, automatic, and safety control system.

Electroplating spin dryer is a device that uses centrifugal methods such as inner cylinder rotation to spin out the moisture contained in objects through the centrifugal force generated by high-speed rotation. Electroplating dryers can be divided into: discharge discharge electroplating dryers, discharge electroplating dryers, fixed electroplating dryers, and movable electroplating dryers. It is mainly used for washing and dehydrating various textile (needle) products, clothing, printing and dyeing, food, hardware, chemical raw materials, latex products, etc. It is widely applicable to enterprises and institutions such as textile, printing and dyeing, clothing, hotels, hospitals, chemical, food, hardware, mechanical parts, and latex products. In terms of industry, it is suitable for various metal parts to be ground, cut, oil washed, washed, cooled, and soaked in anti rust solution before dehydration (oil). It is also suitable for drying, dehydrating, and degreasing small hardware parts, electronic parts, iron filings, aluminum filings, and copper filings; And factories such as electroplating and grinding processing plants, hardware lathe processing plants, and hardware fastener factories. The electroplating spin dryers are all equipped with a three legged suspended pendulum structure, which can avoid the vibration of the foundation during operation due to the unbalanced load inside the impeller.

The inner cylinder and outer shell of the electroplating spin dryer are made of stainless steel plate material, the impeller is made of stainless steel plate, the cage base and chassis are made of cast iron material, and the water outlet pipe is located below the chassis.

The spindle of the electroplating spin dryer is made of high-quality steel that has undergone heat treatment and precision machining. The transmission part adopts triangular tape transmission, and the centrifugal starting wheel is directly driven by the motor, which can slowly start the machine and gradually reach the design speed to ensure smooth operation of the machine. There is a brake opening and closing arm inside the machine, which has good braking performance and can quickly stop the machine.